How To Set Up The Kreg Rip Cut

Kreg is known for making reliable clamping, joining, and cutting tools. The company prides itself on the precision and quality of their tools. It's non surprising that the Kreg Rip-cutting Circular Saw Edge Guide meets expectations, and perhaps exceeds them.

This handy universal circular saw attachment is designed to create authentic, direct, and repeatable cuts upwardly to 24 inches broad. But clench it into identify, prepare it to the desired width, then rip those big plywood sheets into pieces as desired.

Key Features of the Kreg KMA2675 Kreg Rip-Cut

The Kreg KMA2675 features 3 major components. These are the rail, which has useful measurement markings, the sled, which attaches to the saw, and the handle slot. Both the rail and the edge guide are reversible, allowing for left or right-handed employ. This is basically a higher capacity and greater functional version of a rip fence. Equally yous might imagine, it expands the saw'south usefulness.

At that place is a filler strip on the sled, which is used to accommodate saws with either angled or flat leading edges. Y'all can simply pop it out with a screwdriver and flip information technology over. The base plate clamps are used to secure the saw and the sled together. If you become Kreg'due south Accu-Cut the sled volition also act as its foundation.

The cursor is a slice made of clear plastic with a red strip on information technology. This is used to help orient the rail and its measurement marking to the cutline of the saw blade, enhancing accuracy. This feature is very helpful for ensuring that everything works together, producing repeatable straight cuts.

The final component for the Kreg rip-cut is the indexing end. This marks the saw'southward position on the sled so that you tin can remove and supplant information technology without having to take fourth dimension for reindexing or recalibration.

How Does the Kreg Rip-Cutting Circular Saw Guide Perform?

The Kreg Rip-Cutting circular saw guide is user-friendly – and that's one of the best things almost it. Hither's how it works. You can literally have this product put together in 45 seconds once information technology has been removed from the packaging. The edge guide and the runway are screwed together with just 2 screws. You then orient the filler strip in the sled in order to set it to cut angled or flat edges. Then you lot install the cursor and remove the indexing stop. Later that, y'all set the base claps and tighten downward the screws against the shoe of the saw. Adjacent, you lot put the indexing end back and put the sled onto the rail.

Lining Up the Cursor

After the cursor has been fastened, information technology's fourth dimension to line up the cutline with its measurement markings. In order to line it up, you need to first lift upward the blade guard. Then y'all slide the sled so that the bract makes contact with the edge guide. Now you should run across that the crimson line on the cursor covers the line on the rails. Now that this has been washed you lot can determine the length of your cuts without having to use a tape mensurate.

The Kreg Saw Guide Offers Accuracy and Control

In the starting time, yous might find that it can exist a flake awkward getting used to a new device beingness connected to your saw. The connexion isn't flimsy, but you lot should still take intendance as y'all may curve the runway if there is besides much strength applied. The manufacturer recommends that y'all take care when setting information technology down, as it is possible for harm to occur.

Beyond that, you are able to operate your saw with ane hand and manage the border guide via its large handle with the other hand. This user-friendly feature provides you lot with increased control of your cuts. Simply gear up the track onto the workpiece and so button the edge guide into the edge of it. Then you demand to motility the sled forth the rails until y'all attain the desired width. Check the cursor for accurate measurement. Once you have everything ready, lock in the sled with the grayness clamp.

Things to Keep in Mind

While this accompaniment is well-congenital, information technology's possible to create weak points past accidentally over-tightening the screws that agree the clamps in place. You want to be careful with this as overtightening tin cause the clamps to push out from the sled. While the sled is made from a polymer that is resistant to impact, either under tightening or over tightening tin can crusade the connections to fail.

Only like any other tool in the shop, the Kreg Saw Guide can make quite a difference, especially if y'all tend to rip plywood on a regular basis. Information technology's an inexpensive and helpful accompaniment that can increment accurateness and eliminate frustration while helping yous save time on projects of all kinds. Is this tool worth the investment? We think then!